A radon result at or above 4.0 pCi/L is a reason to act, and the steps are clear. EPA says to confirm with a follow-up test, then fix the home with a qualified mitigator and retest. Here is the sequence, with the sources for each step.
Keep it in perspective
A high result tells you something you can act on. EPA's guidance is built around a clear sequence of steps, and its message is that radon problems can be fixed. EPA says radon reduction systems work, and that most homes can be fixed for about the same cost as other common home repairs, with costs depending on the size and design of the home and the method needed.
Step 1: Take a follow-up test
EPA says if a short-term test result is 4 pCi/L or higher, take a follow-up test to be sure. You can follow up with a long-term test for a better view of your year-round average, or with a second short-term test if you need results quickly. If the first result was more than twice 4 pCi/L, take a second short-term test immediately.
Keep windows and doors closed as the test requires, and leave the kit in place for the full time. See how to test for radon.
Step 2: Compare to the reference levels
| Level | Source | What it says |
|---|
| 4.0 pCi/L or higher | EPA action level | Fix your home. After a second short-term test, consider fixing if the average of the two is 4 pCi/L or higher. |
| 2 to 4 pCi/L | EPA | Consider fixing your home. |
| 2.7 pCi/L (100 Bq/m3) | WHO reference level | WHO recommends a national reference level of 100 Bq/m3 if possible, and not above 300 Bq/m3 (8.1 pCi/L). |
See the radon levels chart for the full range.
Step 3: Hire a qualified mitigator
EPA recommends a qualified radon mitigation contractor. Check with your state radon office, because many states require licensing, certification or registration. For states without those rules, EPA suggests asking about professional proficiency credentials and about standards the contractor follows. The EPA Consumer's Guide gives a checklist of what a proposal should include, such as diagnostic testing before design, a warning device and testing after installation.
Step 4: Compare quotes
EPA says to get an estimate from one or more qualified contractors. Compare what each proposal includes and ask for written operating and maintenance instructions and any warranties. For typical costs, see the radon mitigation system cost guide.
Step 5: Retest after the system is installed
EPA says a post-mitigation test should be done within 30 days of installation, but no sooner than 24 hours after the system is running with the fan on. A two- to seven-day measurement is recommended, with windows and doors closed 12 hours before and during the test. EPA says to retest at least every two years afterward.
What not to rely on
EPA says natural ventilation, such as opening windows, is only a temporary approach, and that radon concentrations most often return to previous values within about 12 hours after windows and doors are closed. The table in the EPA Consumer's Guide says sealing of radon entry routes is normally only used with other techniques. See radon mitigation for the main methods.
This page gives general information and is not medical advice. For personal health questions, talk to a doctor.
Frequently Asked Questions
Is a radon test result of 4.0 pCi/L or higher an emergency?
It is a reason to act, calmly and in order. EPA says to take a follow-up test and to fix your home if the confirmed level is 4 pCi/L or higher. EPA also says radon reduction systems work, and that some can reduce radon by up to 99 percent.
What if my result falls in the 2 to 4 pCi/L range?
EPA says to consider fixing your home in that range. EPA says no level of radon is known to be safe and that you can reduce risk by lowering your radon level. The WHO reference level is 2.7 pCi/L (100 Bq/m3), which sits inside that range.
Do I need a second test before I hire anyone?
EPA says to take a follow-up test. If the first short-term result is more than twice 4 pCi/L, take a second short-term test immediately. After a long-term follow-up, fix your home at 4 pCi/L or more. After a second short-term test, consider fixing if the average of the two is 4 pCi/L or higher.
How do I find a qualified radon mitigator?
Check with your state radon office first. Many states require radon professionals to be licensed, certified or registered. You can also look at the private proficiency programs EPA names, such as NRPP and NRSB. See radon levels and state programs.
How many quotes should I get?
EPA says to get an estimate from one or more qualified contractors. Getting more than one lets you compare diagnostic testing, warning devices, post-installation testing and warranties. Ask whether the contractor will inspect your home before quoting. See the cost guide.
Sources
The steps and thresholds above come from EPA, WHO and the named professional programs.
- EPA, A Citizen's Guide to Radon (PDF): EPA testing steps, test placement, closed-house conditions, and what test results mean.
- EPA, Consumer's Guide to Radon Reduction (PDF): how radon reduction systems work, hiring a contractor, and maintaining a system.
- EPA, What is EPA's Action Level for Radon and What Does it Mean?: the 4 pCi/L action level, the 2 to 4 pCi/L range, and average indoor radon.
- EPA, Does the 2009 WHO recommendation affect EPA's action level?: how EPA describes the WHO reference level of 2.7 pCi/L.
- EPA, How much can a radon mitigation system cost?: EPA's statement on mitigation costs.
- EPA, Find a Radon Test Kit or Measurement and Mitigation Professional: where to get test kits and how to find qualified radon service providers.
- EPA, state, regional, and tribal radon program contacts: contact details for each state radon program.
- National Radon Proficiency Program (NRPP): one of two national radon proficiency programs EPA recognizes.
- National Radon Safety Board (NRSB): the other national radon proficiency program EPA recognizes.
- WHO, Radon and health (fact sheet): the WHO reference level of 100 Bq/m3 (2.7 pCi/L) and international guidance.