Radon is a naturally occurring radioactive gas that can build up indoors, and the only way to know the level in a home is to test it. This page shows what EPA's published radon zone map says about New Hampshire, and points to the official state radon program for local information.
What the data says
EPA radon zones in New Hampshire
EPA assigns each county a radon zone. Of the 10 counties in New Hampshire that EPA lists, 1 is in Zone 1 (highest potential), 9 are in Zone 2 (moderate potential), and none are in Zone 3 (low potential). Source: EPA Map of Radon Zones, text version (xls) and EPA Map of Radon Zones: New Hampshire (PDF).
Zone 1 (highest potential): 1
Carroll County
Zone 2 (moderate potential): 9
Belknap County, Cheshire County, Coos County, Grafton County, Hillsborough County, Merrimack County, Rockingham County, Strafford County, Sullivan County
Data as of: EPA Map of Radon Zones, county zone assignments from EPA's text version dated September 2025; checked November 21, 2026.
What the zones mean
Zone 1 counties have a predicted average indoor screening level greater than 4 pCi/L. Zone 2 counties have a predicted average between 2 and 4 pCi/L. Zone 3 counties have a predicted average below 2 pCi/L. Source: EPA Map of Radon Zones: New Hampshire (PDF).
Data as of: EPA state map document linked above; the Map of Radon Zones was developed in 1993.
What the map cannot tell you
EPA says the map should not be used to determine whether individual homes need to be tested, and that all homes should be tested regardless of zone designation. Source: EPA Map of Radon Zones: New Hampshire (PDF). EPA also recommends that the map be supplemented with available local data. Source: EPA, The EPA Map of Radon Zones.
Data as of: EPA map page and state map document, checked November 21, 2026.