Radon is a naturally occurring radioactive gas that can build up indoors, and the only way to know the level in a home is to test it. This page shows what EPA's published radon zone map says about Arizona, and points to the official state radon program for local information.
What the data says
EPA radon zones in Arizona
EPA assigns each county a radon zone. Of the 15 counties in Arizona that EPA lists, none are in Zone 1 (highest potential), 15 are in Zone 2 (moderate potential), and none are in Zone 3 (low potential). Source: EPA Map of Radon Zones, text version (xls) and EPA Map of Radon Zones: Arizona (PDF).
Zone 2 (moderate potential): 15
Apache County, Cochise County, Coconino County, Gila County, Graham County, Greenlee County, La Paz County, Maricopa County, Mohave County, Navajo County, Pima County, Pinal County, Santa Cruz County, Yavapai County, Yuma County
Data as of: EPA Map of Radon Zones, county zone assignments from EPA's text version dated September 2025; checked November 21, 2026.
What the zones mean
Zone 1 counties have a predicted average indoor screening level greater than 4 pCi/L. Zone 2 counties have a predicted average between 2 and 4 pCi/L. Zone 3 counties have a predicted average below 2 pCi/L. Source: EPA Map of Radon Zones: Arizona (PDF).
Data as of: EPA state map document linked above; the Map of Radon Zones was developed in 1993.
What the map cannot tell you
EPA says the map should not be used to determine whether individual homes need to be tested, and that all homes should be tested regardless of zone designation. Source: EPA Map of Radon Zones: Arizona (PDF). EPA also recommends that the map be supplemented with available local data. Source: EPA, The EPA Map of Radon Zones.
Data as of: EPA map page and state map document, checked November 21, 2026.