Radon.org logo

Radon Levels in Montana

EPA radon zone counts for Montana, plus the average from submitted test-kit results where available. Test your own home to know your level.

Average indoor radon level in Montana
7.4pCi/L
Average of submitted Air Chek, Inc. test-kit results (Radon.com map). Not an official government survey; no collection year published.
State average
Above the EPA action level
7.4 pCi/L state average, above the EPA action level of 4.0 pCi/L. Any home can be high, so test.
Test your home
State average only (Air Chek, Inc. test-kit results). EPA action level 4.0 pCi/L; WHO reference level 2.7 pCi/L.
Radon potential by county
  • High radon potential (predicted avg above 4 pCi/L)49 counties (88%)
  • Moderate (2–4 pCi/L)7 (12%)
  • Low (below 2 pCi/L)0 (0%)
EPA radon zone: Zone 1 = high, Zone 2 = moderate, Zone 3 = low. Source: EPA Map of Radon Zones. Counts are counties or county equivalents (56 total); percentages rounded.

Sources: EPA Map of Radon Zones (https://www.epa.gov/radon/epa-map-radon-zones), county zone counts from EPA zone assignments matched to U.S. Census 2020 counties. Average level: aggregate of submitted Air Chek, Inc. test-kit results shown on the Radon.com U.S. radon levels map (https://cgi.radon.com/maps/), a private-company aggregate, not an official government survey, with no collection year published. Last reviewed November 21, 2026.

Ready to test? Pick a test kit or monitor

Testing is the only way to know the radon level in your home. EPA recommends testing every home; state averages do not predict your result.

As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure. Product listings and images come from Amazon.

Compare more detectors · How to test

Radon is a naturally occurring radioactive gas that can build up indoors, and the only way to know the level in a home is to test it. This page shows what EPA's published radon zone map says about Montana, and points to the official state radon program for local information.

What the data says

EPA radon zones in Montana

EPA assigns each county a radon zone. Of the 56 counties in Montana that EPA lists, 49 are in Zone 1 (highest potential), 7 are in Zone 2 (moderate potential), and none are in Zone 3 (low potential). EPA also lists Yellowstone National Park, in Zone 2. Source: EPA Map of Radon Zones, text version (xls) and EPA Map of Radon Zones: Montana (PDF).

Zone 1 (highest potential): 49

Beaverhead County, Big Horn County, Blaine County, Broadwater County, Carbon County, Carter County, Cascade County, Chouteau County, Custer County, Daniels County, Dawson County, Deer Lodge County, Fallon County, Fergus County, Flathead County, Gallatin County, Garfield County, Glacier County, Granite County, Hill County, Jefferson County, Judith Basin County, Lake County, Lewis and Clark County, Liberty County, Lincoln County, Madison County, McCone County, Meagher County, Mineral County, Missoula County, Park County, Phillips County, Pondera County, Powder River County, Powell County, Prairie County, Ravalli County, Richland County, Roosevelt County, Rosebud County, Sanders County, Sheridan County, Silver Bow County, Stillwater County, Teton County, Toole County, Valley County, Wibaux County

Zone 2 (moderate potential): 7

Golden Valley County, Musselshell County, Petroleum County, Sweet Grass County, Treasure County, Wheatland County, Yellowstone County

Data as of: EPA Map of Radon Zones, county zone assignments from EPA's text version dated September 2025; checked November 21, 2026.

What the zones mean

Zone 1 counties have a predicted average indoor screening level greater than 4 pCi/L. Zone 2 counties have a predicted average between 2 and 4 pCi/L. Zone 3 counties have a predicted average below 2 pCi/L. Source: EPA Map of Radon Zones: Montana (PDF).

Data as of: EPA state map document linked above; the Map of Radon Zones was developed in 1993.

What the map cannot tell you

EPA says the map should not be used to determine whether individual homes need to be tested, and that all homes should be tested regardless of zone designation. Source: EPA Map of Radon Zones: Montana (PDF). EPA also recommends that the map be supplemented with available local data. Source: EPA, The EPA Map of Radon Zones.

Data as of: EPA map page and state map document, checked November 21, 2026.

How to test in Montana

EPA recommends testing your home for radon. Its testing steps are to take a short-term test first, and if the result is 4 pCi/L or higher, to follow up with either a long-term test or a second short-term test to be sure. Source: EPA, A Citizen's Guide to Radon (PDF).

Your state radon office can provide information on how to test your home and how to find a qualified radon professional. Source: EPA, A Consumer's Guide to Radon Reduction (PDF). For the steps, see how to test for radon, and to compare kits see radon test kits.

If your result is high

EPA recommends fixing your home if your radon level is confirmed to be 4 pCi/L or higher, and says to consider fixing between 2 and 4 pCi/L. Source: EPA, The EPA Map of Radon Zones. The World Health Organization sets its reference level at 100 Bq/m3, which is 2.7 pCi/L. Source: WHO, Radon and health.

See what to do if your radon test is high and radon mitigation for the next steps. EPA recommends a qualified radon mitigation contractor. Source: EPA, A Consumer's Guide to Radon Reduction (PDF).

State radon program

Montana Department of Environmental Quality. EPA lists this as the state radon contact. Official page: Montana radon program. Source for the listing: EPA, Map of Radon Zones and supplemental information, state contacts.

EPA says many states require radon professionals to be licensed, certified or registered, and to install radon mitigation systems that meet state requirements. Check with the state program for what applies in Montana. Source: EPA, A Consumer's Guide to Radon Reduction (PDF).

Data as of: EPA state contacts page, checked November 21, 2026.

Frequently Asked Questions

What do EPA radon zones mean for Montana?

EPA places each area in one of three zones based on the predicted average indoor screening level: Zone 1 is above 4 pCi/L, Zone 2 is 2 to 4 pCi/L, and Zone 3 is below 2 pCi/L. For the zone counts in Montana, see EPA radon zones in Montana. Source: EPA Map of Radon Zones: Montana (PDF).

Should I test my home if my county is in a lower zone?

Yes. EPA says all homes should be tested regardless of zone designation, and that the map should not be used to decide whether an individual home needs testing. Source: EPA Map of Radon Zones: Montana (PDF).

Where can I find the Montana radon program?

EPA lists the Montana Department of Environmental Quality as the state radon contact. You can reach it through its official radon page. Your state radon office can provide information on how to test and how to find a qualified radon professional. Sources: EPA state contacts and EPA, A Consumer's Guide to Radon Reduction (PDF).

Sources