Radon detectors and monitors give readings you can check at home, while test kits are mailed to a lab. Knowing how they differ helps you choose a device and read its numbers sensibly.
Continuous monitors and test kits
EPA describes two groups of testing devices. Passive devices, such as charcoal canisters and alpha-track detectors, need no power and are sent to a lab. Active devices need power, and the group includes continuous radon monitors.
A continuous radon monitor records radon levels over time instead of producing one number at a lab. EPA lists continuous monitors among the devices used for short-term testing, which can last from 2 to 90 days. Mail-in kits are covered in our radon test kit guide.
Digital and passive devices
- Digital detectors and monitors. These run on power and show readings you can check at home. Because radon levels vary from day to day and season to season, a short stretch of readings may not match your year-round average.
- Passive devices. These have no display. You expose the device for the time on the package, then mail it to a laboratory for analysis, and results usually take a few weeks.
Neither type is better for every home. Digital devices suit people who want ongoing readings, and passive kits suit people who want a simple, low-cost lab result. See our digital detector comparison or view the Corentium Home, EcoBlu or EcoQube on Amazon.
Accuracy and limits of home monitors
We treat consumer radon monitors as screening tools. A reading can tell you whether to take a closer look, but it does not replace a carefully run test or a professional measurement.
EPA says a result of 4.0 pCi/L or higher should be confirmed with a follow-up test, using either a second short-term test or a long-term test. If a home monitor shows a high reading, follow the same steps. You can repeat the measurement, or hire a qualified radon measurement professional. EPA says radon test devices that are used properly provide accurate and reliable results.
Your state radon program can help you find a qualified professional. See our radon testing guide for the full set of EPA testing steps.
Where to place a detector
Follow the maker's instructions first. EPA's general placement guidance for test devices is a useful reference:
- Use the lowest lived-in level of the home.
- Choose a room used regularly, such as a living room, den, playroom, or bedroom, and avoid kitchens and bathrooms.
- Place the device at least 20 inches above the floor, away from drafts, high heat, high humidity, and exterior walls.
- Keep it where it will not be moved or disturbed during the test.
For short-term testing, EPA also asks you to keep windows and outside doors closed as much as possible. Read more under closed-house conditions.
Compare specific detectors
Our best radon detectors guide compares continuous digital detectors. We also have individual reviews of the Airthings Corentium Home, the Ecosense EcoQube EQ100, and the Ecosense EcoBlu EB100. You can also view them on Amazon: Airthings Corentium Home, Ecosense EcoQube EQ100 and Ecosense EcoBlu EB100.
More radon detectors on Amazon
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Some guides linked from this page include Amazon affiliate links, which are marked rel="sponsored nofollow". Read our Affiliate Disclosure and our Editorial Standards to see how affiliate relationships work.
Frequently Asked Questions
Is a digital radon monitor better than a test kit?
Neither is better in every case. A monitor shows readings over time, and a passive kit gives a lab result at low cost. EPA lists both continuous monitors and passive devices for short-term testing, so choose based on whether you want ongoing readings or a single lab result.
What should I do if my monitor shows a high number?
Confirm it before you act. EPA recommends a follow-up test when a result is 4.0 pCi/L or higher, either a second short-term test or a long-term test. A qualified radon measurement professional can also run the confirmation, and your state radon program can help you find one.
Where should I put a radon monitor?
Follow the instructions that come with your device. As a general rule from EPA, use the lowest lived-in level, a regularly used room that is not a kitchen or bathroom, at least 20 inches above the floor and away from drafts, heat, humidity, and exterior walls.
Can a home monitor replace the test after a mitigation system is installed?
EPA recommends testing again after radon mitigation work is finished, and says the test should be done by an independent, qualified radon tester. A home monitor can show ongoing readings afterward, but it is not a substitute for that independent test. See our radon mitigation guide for more.
Sources
- EPA, A Citizen's Guide to Radon (PDF): EPA testing steps, test placement, closed-house conditions, and what test results mean.
- EPA, Home Buyer's and Seller's Guide to Radon (PDF, March 2024 revision): testing and fixing radon during a home sale.
- EPA, Consumer's Guide to Radon Reduction (PDF): how radon reduction systems work, hiring a contractor, and maintaining a system.
- EPA, Are radon measurements accurate and reliable?: EPA's position on radon test device accuracy.
- EPA, Find a Radon Test Kit or Measurement and Mitigation Professional: where to get test kits and how to find qualified radon service providers.
- EPA Radon: the U.S. EPA radon program page and starting point for testing, fixing, and radon zone information.
- CDC Radon: public health information on radon, testing, and reducing radon levels.
- WHO, Radon and health (fact sheet): the WHO reference level of 100 Bq/m3 (2.7 pCi/L) and international guidance.