Radon is a naturally occurring radioactive gas that can build up indoors, and the only way to know the level in a home is to test it. This page shows what EPA's published radon zone map says about Virginia, and points to the official state radon program for local information.
What the data says
EPA radon zones in Virginia
EPA assigns each area a radon zone. Of the 136 counties and independent cities in Virginia that EPA lists (95 counties and 41 independent cities), 64 are in Zone 1 (highest potential), 28 are in Zone 2 (moderate potential), and 44 are in Zone 3 (low potential). Source: EPA Map of Radon Zones, text version (xls) and EPA Map of Radon Zones: Virginia (PDF).
Zone 1 (highest potential): 64
Alleghany County, Amelia County, Appomattox County, Augusta County, Bath County, Bland County, Botetourt County, Brunswick County, Buckingham County, Campbell County, Chesterfield County, Clarke County, Craig County, Cumberland County, Dinwiddie County, Fairfax County, Fluvanna County, Frederick County, Giles County, Goochland County, Henry County, Highland County, Lee County, Louisa County, Montgomery County, Nottoway County, Orange County, Page County, Patrick County, Pittsylvania County, Powhatan County, Pulaski County, Roanoke County, Rockbridge County, Rockingham County, Russell County, Scott County, Shenandoah County, Smyth County, Spotsylvania County, Stafford County, Tazewell County, Warren County, Washington County, Wythe County Also in Zone 1: 19 independent cities.
Zone 2 (moderate potential): 28
Albemarle County, Amherst County, Arlington County, Bedford County, Buchanan County, Carroll County, Charlotte County, Culpeper County, Dickenson County, Fauquier County, Floyd County, Franklin County, Grayson County, Greene County, Halifax County, Loudoun County, Lunenburg County, Madison County, Mecklenburg County, Nelson County, Prince Edward County, Prince William County, Rappahannock County, Wise County Also in Zone 2: 4 independent cities.
Zone 3 (low potential): 44
Accomack County, Caroline County, Charles City County, Essex County, Gloucester County, Greensville County, Hanover County, Henrico County, Isle of Wight County, James City County, King George County, King William County, King and Queen County, Lancaster County, Mathews County, Middlesex County, New Kent County, Northampton County, Northumberland County, Prince George County, Richmond County, Southampton County, Surry County, Sussex County, Westmoreland County, York County Also in Zone 3: 18 independent cities.
Data as of: EPA Map of Radon Zones, county zone assignments from EPA's text version dated September 2025; checked November 21, 2026.
What the zones mean
Zone 1 counties have a predicted average indoor screening level greater than 4 pCi/L. Zone 2 counties have a predicted average between 2 and 4 pCi/L. Zone 3 counties have a predicted average below 2 pCi/L. Source: EPA Map of Radon Zones: Virginia (PDF).
Data as of: EPA state map document linked above; the Map of Radon Zones was developed in 1993.
What the map cannot tell you
EPA says the map should not be used to determine whether individual homes need to be tested, and that all homes should be tested regardless of zone designation. Source: EPA Map of Radon Zones: Virginia (PDF). EPA also recommends that the map be supplemented with available local data. Source: EPA, The EPA Map of Radon Zones.
Data as of: EPA map page and state map document, checked November 21, 2026.