Radon is a naturally occurring radioactive gas that can build up indoors, and the only way to know the level in a home is to test it. This page shows what EPA's published radon zone map says about Massachusetts, and points to the official state radon program for local information.
What the data says
EPA radon zones in Massachusetts
EPA assigns each county a radon zone. Of the 14 counties in Massachusetts that EPA lists, 3 are in Zone 1 (highest potential), 10 are in Zone 2 (moderate potential), and 1 is in Zone 3 (low potential). Source: EPA Map of Radon Zones, text version (xls) and EPA Map of Radon Zones: Massachusetts (PDF).
Zone 1 (highest potential): 3
Essex County, Middlesex County, Worcester County
Zone 2 (moderate potential): 10
Barnstable County, Berkshire County, Bristol County, Dukes County, Franklin County, Hampden County, Hampshire County, Nantucket County, Norfolk County, Plymouth County
Zone 3 (low potential): 1
Suffolk County
Data as of: EPA Map of Radon Zones, county zone assignments from EPA's text version dated September 2025; checked November 21, 2026.
What the zones mean
Zone 1 counties have a predicted average indoor screening level greater than 4 pCi/L. Zone 2 counties have a predicted average between 2 and 4 pCi/L. Zone 3 counties have a predicted average below 2 pCi/L. Source: EPA Map of Radon Zones: Massachusetts (PDF).
Data as of: EPA state map document linked above; the Map of Radon Zones was developed in 1993.
What the map cannot tell you
EPA says the map should not be used to determine whether individual homes need to be tested, and that all homes should be tested regardless of zone designation. Source: EPA Map of Radon Zones: Massachusetts (PDF). EPA also recommends that the map be supplemented with available local data. Source: EPA, The EPA Map of Radon Zones.
Data as of: EPA map page and state map document, checked November 21, 2026.