Radon is a naturally occurring radioactive gas that can build up indoors, and the only way to know the level in a home is to test it. This page shows what EPA's published radon zone map says about North Carolina, and points to the official state radon program for local information.
What the data says
EPA radon zones in North Carolina
EPA assigns each county a radon zone. Of the 100 counties in North Carolina that EPA lists, 8 are in Zone 1 (highest potential), 31 are in Zone 2 (moderate potential), and 61 are in Zone 3 (low potential). Source: EPA Map of Radon Zones, text version (xls) and EPA Map of Radon Zones: North Carolina (PDF).
Zone 1 (highest potential): 8
Alleghany County, Buncombe County, Cherokee County, Henderson County, Mitchell County, Rockingham County, Transylvania County, Watauga County
Zone 2 (moderate potential): 31
Alexander County, Ashe County, Avery County, Burke County, Caldwell County, Caswell County, Catawba County, Clay County, Cleveland County, Forsyth County, Franklin County, Gaston County, Graham County, Haywood County, Iredell County, Jackson County, Lincoln County, Macon County, Madison County, McDowell County, Polk County, Rutherford County, Stokes County, Surry County, Swain County, Vance County, Wake County, Warren County, Wilkes County, Yadkin County, Yancey County
Zone 3 (low potential): 61
Alamance County, Anson County, Beaufort County, Bertie County, Bladen County, Brunswick County, Cabarrus County, Camden County, Carteret County, Chatham County, Chowan County, Columbus County, Craven County, Cumberland County, Currituck County, Dare County, Davidson County, Davie County, Duplin County, Durham County, Edgecombe County, Gates County, Granville County, Greene County, Guilford County, Halifax County, Harnett County, Hertford County, Hoke County, Hyde County, Johnston County, Jones County, Lee County, Lenoir County, Martin County, Mecklenburg County, Montgomery County, Moore County, Nash County, New Hanover County, Northampton County, Onslow County, Orange County, Pamlico County, Pasquotank County, Pender County, Perquimans County, Person County, Pitt County, Randolph County, Richmond County, Robeson County, Rowan County, Sampson County, Scotland County, Stanly County, Tyrrell County, Union County, Washington County, Wayne County, Wilson County
Data as of: EPA Map of Radon Zones, county zone assignments from EPA's text version dated September 2025; checked November 21, 2026.
What the zones mean
Zone 1 counties have a predicted average indoor screening level greater than 4 pCi/L. Zone 2 counties have a predicted average between 2 and 4 pCi/L. Zone 3 counties have a predicted average below 2 pCi/L. Source: EPA Map of Radon Zones: North Carolina (PDF).
Data as of: EPA state map document linked above; the Map of Radon Zones was developed in 1993.
What the map cannot tell you
EPA says the map should not be used to determine whether individual homes need to be tested, and that all homes should be tested regardless of zone designation. Source: EPA Map of Radon Zones: North Carolina (PDF). EPA also recommends that the map be supplemented with available local data. Source: EPA, The EPA Map of Radon Zones.
Data as of: EPA map page and state map document, checked November 21, 2026.