Buyers and sellers often have days, not weeks, to test for radon. EPA wrote special testing guidelines for real estate so the result is reliable and the timeline stays workable.
Is a radon test required?
It depends on your state, your local government, and your sales contract. EPA notes that some state or local governments require radon information to be disclosed to buyers, and that some states require testers to follow a specific testing protocol. We do not summarize individual state laws on this page.
To learn what applies where you live, contact your state radon program and read EPA's Home Buyer's and Seller's Guide to Radon. Both are reliable places to start, and neither replaces advice from your agent or attorney.
Timing and test types in a transaction
EPA's guide lists three short-term options that are acceptable for deciding whether a home should be fixed, and says all radon tests should run for a minimum of 48 hours. Some devices need longer.
- Two passive tests at once: two short-term tests side by side in the same location.
- Two passive tests in sequence: a first short-term test, then an identical device in the same location right after it ends.
- One continuous monitor: a continuous radon monitor running for at least 48 hours.
If time permits, a long-term test of more than 90 days can confirm an initial short-term result. EPA recommends testing the lowest level of the home that could be used regularly. Learn more about test types in our radon testing guide.
Closed-house conditions and test interference
A reliable result depends on the occupants' cooperation. EPA says interference with the test or with closed-house conditions will invalidate the result.
- Tests of 2 to 4 days: keep closed-house conditions for at least 12 hours before the test starts and for the whole test.
- Tests of 4 to 7 days: EPA recommends maintaining closed-house conditions.
- Placement: do not test in a closet, stairway, hallway, crawl space, or an enclosed area with high humidity or fast air movement, such as a kitchen, bathroom, laundry room, or furnace room.
- Detecting interference: EPA lists devices that record radon often to catch unusual swings, motion detectors, proximity detectors, and records of barometric pressure and temperature.
A result at or above 4.0 pCi/L
EPA says to fix the home if the average of two short-term tests is 4.0 pCi/L or more, if a continuous monitor's average is 4.0 pCi/L or more, or if a long-term test result is 4.0 pCi/L or higher.
When elevated levels are found during a sale, EPA says the buyer and seller should discuss the timing and costs of radon reduction. Most homes can be fixed for about the same cost as other common home repairs, according to EPA, so get an estimate from one or more qualified mitigators. See radon mitigation for how systems work.
Retest and qualified professionals
After mitigation work is complete, test again to confirm radon levels have come down. EPA recommends that an independent, qualified radon tester do this test.
- Qualified professionals. Your state radon program can give you a list of qualified testers and mitigators. EPA also recognizes two national proficiency programs, NRPP and NRSB.
- State rules. Any mitigation system must conform to your state's regulations. In states without regulations, EPA recommends following its current voluntary consensus-based standards.
For the overall picture, return to radon and buying or selling a home, or see radon levels by state and ZIP code for state radon program links.
Frequently Asked Questions
Is a radon test required to close on a home?
There is no single answer, because it depends on your state or local rules and on the contract. Ask your agent or attorney, and check with your state radon program for any testing protocol or disclosure rule.
How long does a radon test take in a home sale?
When time is short, real estate tests are short-term tests. EPA says every radon test should last at least 48 hours, and some devices need longer. Plan the test early so there is time for a second test or for repairs if the result is high.
What happens if someone opens windows or moves the device?
EPA says interference with the test or with closed-house conditions will invalidate the result. Ask the occupants to keep windows and outside doors closed as directed, and consider a monitor with tamper detection or a tester who records conditions during the test.
What should I do with a result at or above 4.0 pCi/L?
EPA recommends fixing the home. Talk with the other party about timing and costs, get an estimate from a qualified mitigator, and test again after the work is complete. Your contract may already spell out who pays for mitigation.
Sources
- EPA, Home Buyer's and Seller's Guide to Radon (PDF, March 2024 revision): testing and fixing radon during a home sale.
- EPA, Radon Resources for Real Estate Community: EPA resources for buying or selling a home.
- EPA, state, regional, and tribal radon program contacts: contact details for each state radon program.
- EPA, Find a Radon Test Kit or Measurement and Mitigation Professional: where to get test kits and how to find qualified radon service providers.
- EPA, A Citizen's Guide to Radon (PDF): EPA testing steps, test placement, closed-house conditions, and what test results mean.
- EPA, Consumer's Guide to Radon Reduction (PDF): how radon reduction systems work, hiring a contractor, and maintaining a system.
- EPA Radon: the U.S. EPA radon program page and starting point for testing, fixing, and radon zone information.
- CDC Radon: public health information on radon, testing, and reducing radon levels.